2019-2020 Catalog with Addendum II 
    
    Apr 19, 2024  
2019-2020 Catalog with Addendum II [ARCHIVED CATALOG]

Course Descriptions


The information following course titles indicate (1) hours per week of lecture, (2) hours per week of laboratory and (3) semester credit hours. A small number of courses are offered for a variable number of credit hours, and the semester credit hours listed represent the maximum number of hours possible for credit. This will be noted in the course description.

The frequency of offering follows the meeting and credit hour information. Courses offered every year are designated by semester(s) only. Courses offered every other year are designated by semester and odd/even year.

Note: Since most courses are not offered every semester, students should be aware that failure to take a required course when it is offered may delay graduation.

Any course may be offered on demand should sufficient interest be demonstrated and should a qualified instructor be available. “Demand” courses with a defined content will be offered as regularly as practical for the host department.

At the end of the course description, the following information will be given when applicable: laboratory information, corequisites (“simultaneous enrollment”) and prerequisites, cross listed courses (“same as”), special fees, and pertinent information about the use of the course.

Courses and Numbering

All courses are listed alphabetically by course prefix and numerically within each prefix. The department and college assignments are also noted. ACU uses a three-digit course numbering system. Courses numbered 100 to 299 are lower-level courses (primarily for freshmen and sophomores). Courses numbered from 300 to 499 are upper-level, or advanced, courses (primarily for juniors and seniors). Courses numbered 500 to 799 are graduate courses. All courses numbered 000 to 099 do not count toward graduation or GPA.

Prerequisites and Corequisites

Some courses have prerequisites, which must be met before a student may register for that course, or corequisites, which must be completed simultaneously. In some cases, a student may have special knowledge, skills or background that will enable him or her to perform well in a given class without meeting its prerequisites or corequisites. Such a student should seek special permission from the department offering the course.

A course may not use the same requirement as both prerequisite and corequisite. Courses listed as corequisite must be taken together. Students may not drop or withdraw from a course with corequisite requirements without dropping or withdrawing from both courses. Students may repeat a course with corequisite requirements alone in subsequent attempts if they fail or do not receive degree credit for the course on the first attempt. However, in courses with a subject code of EACH, EDUC, NURS, or SPAN, students must repeat both corequisite courses if they fail or do not receive credit for one or both courses on the first attempt.

Students should refer to the most recent catalog for course corequisites, prerequisites, and restrictions.

Course Sequencing

Some courses have recommendations of a previous course(s) for appropriate sequencing. Such recommendations are not prerequisites; the system will allow any student meeting a course’s prerequisites to enroll for a course regardless of whether the student meets the sequencing recommendations. Students are cautioned, however, to follow sequencing recommendations when all of the courses in the sequence are on their degree plans.

Independent Study and Special Topics Courses

Neither an independent study nor a special topics course should be a version or instance of a course that already has been approved for inclusion in the catalog.

Independent Study

An independent study course is a unique, student-initiated and student-driven course. An independent study course should be used to enhance a degree. It should be used as a substitution for degree requirements only in rare circumstances; it should not be used to correct poor planning. All other catalog policies apply.

Independent study courses are usually designed to be worth 3 credit hours. Ideally, independent study courses should make up no more than 6 hours (5 percent) of any student’s undergraduate degree. They should make up no more than 20 percent of any student’s graduate degree. Independent study courses should use the even hundred course number appropriate to the level of study (100, 200, 300, 400, 500, 600, 700, etc.)

Student proposals for independent studies may be approved or denied based on faculty interest or availability and departmental priorities. Students in the Doctor of Ministry (DMin) program will incur a separate fee for an independent study course and should contact the Director of the DMin Program for details.

When proposing an independent study, the student should complete the Independent Study Request form and discuss it – including the outcomes and artifacts of the study – with the proposed faculty member. Artifacts should support the student’s and the faculty member’s intended outcomes for the course through research, written work, creative projects, and/or professional projects. If the course is approved by the faculty member, the faculty member is responsible for creating the syllabus for the independent study. The syllabus must include the learning outcomes and how they will be measured.

The syllabus and Independent Study Request form should be submitted to the chair and dean on a timeline that would allow for the proposal to be approved or denied prior to the beginning of the term or part of term in which the course is being proposed. Study Abroad courses should be approved prior to departure from the United States.

Special topics

A special topics course is faculty/department-initiated and faculty-driven. A special topics course will be included in the course schedule for registration in a given term and could be used as a pilot for addition to the curriculum. A substitution form must be submitted for a special topics course to satisfy degree requirement. All other catalog policies apply.

The special topics syllabus must be submitted to the dean before March 1 for a fall course or October 1 for a spring or summer course, so that it will be available for student registration. Special topics courses should choose the course number appropriate to the level of study from the following: 140, 240, 340, 440, 540, 640, 740, etc.

The Texas Common Course Numbering System

The Texas Common Course Numbering System (TCCNS) has been designed for the purpose of aiding students in the transfer of general academic courses between colleges and universities throughout Texas. Common courses are freshman and sophomore academic credit courses that have been identified as common by institutions that are members of the common course numbering system. The system ensures that if the student takes the courses the receiving institution designates as common, then the courses will be accepted in transfer.

For further information contact the transfer course coordinator in the Registrar’s Office.

 

English as a Second Language

  
  • FLEN 049 - Advanced Writing


    Lecture Hours: 4
    Lab Hours: 0
    Credit Hours: 4
    Terms Offered: Fall, Spring, Summer

    English composition training based on various topics accessible to the ESL student at this level. Includes work in writing research papers. This course is available for variable credit. Please see your advisor for more information.

Engineering

  
  • ENGR 115 - Introduction to Engineering and Physics


    Lecture Hours: 2
    Lab Hours: 0
    Credit Hours: 2
    Terms Offered: Fall

    An introduction to the career fields of engineering and physics. Topics include sub disciplines within engineering and physics, tools and methods used in these fields, and the processes of modeling and problem solving. Computational analytical and design tools will also be introduced. Prerequisite: MATH 124  or simultaneous enrollment. Corequisite: ENGR 116 .
  
  • ENGR 116 - Introduction to Engineering and Physics Laboratory


    Lecture Hours: 0
    Lab Hours: 3
    Credit Hours: 1
    Terms Offered: Fall

    A laboratory class demonstrating and exploring topics covered in ENGR 115 . Physical concepts such as force, work, and energy will be illustrated as well as using these concepts within engineering design. Prerequisite: MATH 124  or simultaneous enrollment. Corequisite: ENGR 115  . Course fee.
  
  • ENGR 131 - Computer Aided Design and Modeling


    Lecture Hours: 0
    Lab Hours: 3
    Credit Hours: 1
    Terms Offered: Fall, Spring

    An introductory course in the use of computer aided design (CAD) software for drafting, engineering design, and 3D modeling. Course fee.
  
  • ENGR 135 - Introduction to Electric Circuits


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    Basic electrical measurements and devices, introductory electronics. Emphasis on lab work. Intended for those who will use electronic instruments and methods in their profession. Prerequisite: Simultaneous enrollment in or credit for MATH 185 . Corequisite: ENGR 136 . Same as PHYS 135 .
  
  • ENGR 136 - Introduction to Electric Circuits Laboratory


    Lecture Hours: 0
    Lab Hours: 3
    Credit Hours: 1
    Terms Offered: Spring

    Corequisite: ENGR 135 . Same as PHYS 136 . Course fee.
  
  • ENGR 210 - Digital Logic


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    This course covers fundamental concepts of digital electronics, including binary numbers, binary mathematical operations, error codes, Boolean algebra, Boolean logic simplification, Karnaugh maps, gate-level schematics, combinational logic, sequential logic, latches, flip-flops, counters, clocks, registers, and memory.
  
  • ENGR 211 - Digital Logic Laboratory


    Lecture Hours: 0
    Lab Hours: 3
    Credit Hours: 1
    Terms Offered: Fall

    This is a laboratory course in which students design and build digital systems using hardware description language and FPGAs. Prerequisite: ENGR 210 . Course fee.
  
  • ENGR 220 - Engineering Mechanics: Statics


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall, even years

    A study of composition and resolution of forces, equilibrium of force systems, friction, forces acting on and in trusses and frames, centroids, and moments of inertia. Prerequisite: PHYS 220 /PHYS 221 ; MATH 186  or simultaneous enrollment.
  
  • ENGR 221 - Statics and Dynamics


    Lecture Hours: 4
    Lab Hours: 0
    Credit Hours: 4
    Terms Offered: Fall.

    A study of composition and resolution of forces, equilibrium of force systems, friction, forces acting on and in trusses and frames, centroids, and moments of inertia. Study of the dynamics of particles and rigid bodies, including the governing force-mass-acceleration, work-energy, and impulse-momentum relationships for one- and two-dimensional cases. Prerequisite: PHYS 220  (or simultaneous enrollment) and MATH 185 .
  
  • ENGR 222 - Engineering Mechanics: Dynamics


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring, odd years

    Study of the dynamics of particles and rigid bodies, including the governing force-mass-acceleration, work-energy, and impulse-momentum relationships for two- and three-dimensional cases. Prerequisite: ENGR 220 ; MATH 286  or simultaneous enrollment.
  
  • ENGR 251 - Engineering Management


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    Course provides a foundation of management principles and techniques. Topics include leadership, strategic planning, culture change, human resources, and ethics.
  
  • ENGR 272 - Surveying and Geomatics


    Lecture Hours: 2
    Lab Hours: 3
    Credit Hours: 3
    Terms Offered: Fall, odd years.

    Introduction to the use of modern surveying equipment, map projections, horizontal and vertical curves, earthwork and mapping for capturing data, data processing, and presentation of field data. Prerequisite: MATH 185 . Course fee.
  
  • ENGR 281 - Engineering Thermodynamics


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    A study of the basic concepts of thermodynamic systems. Addresses the first and second laws of thermodynamics, the properties of pure substances, entropy, ideal gas behavior, power and refrigeration cycle analysis, and use of psychometric charts with applications to engineering systems. Prerequisite: PHYS 222   and MATH 186  .
  
  • ENGR 305 - Environmental Health and Safety for Engineers


    Lecture Hours: 2
    Lab Hours: 0
    Credit Hours: 2
    Terms Offered: Spring

    Provides an overview of environmental health and safety history, regulations, and their application for engineering professionals. In particular this course will include OSHA regulations and permits, MSDS’s, workplace hazards and engineering safeguards. Prerequisite: ENGL 112 .
  
  • ENGR 306 - Engineering Ethics


    Lecture Hours: 1
    Lab Hours: 0
    Credit Hours: 1
    Terms Offered: Spring

    The purpose of this course is to provide engineering students with the fundamentals of professional ethics. This course will provide students with a set of tools and concepts that are directly applicable to the personal and professional decisions that may be encountered as practicing engineers. Prerequisite: ENGL 112 .
  
  • ENGR 320 - Material Science


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    Application of material science information in applying engineering materials to the design of components. Evaluating, interpreting, and application of industry standards for materials such as American Society for Testing Materials (ASTM), American Society of Mechanical Engineers (ASME), Society of Automotive Engineers (SAE), American Petroleum Engineers (API), Deutsches Institut für Normung (DIN), and others. Prerequisite: Credit for MATH 185  or placement into MATH 186  or MATH 286  and CHEM 131 /CHEM 133 .
  
  • ENGR 321 - Manufacturing Processing Laboratory


    Lecture Hours: 0
    Lab Hours: 3
    Credit Hours: 1
    Terms Offered: Fall

    Introduction to Materials Science and Manufacturing Engineering Processes. Students will learn about properties of materials that relate to the manufacturing processes of steelmaking, heat treatment, metallography, chip making, and additive manufacturing processes. Corequisite: ENGR 320 . Course fee.
  
  • ENGR 322 - Advanced Dynamics and Vibrations


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall, odd years

    Introduction to rigid body, three-dimensional Kinematics and Kinetics and vibration in dynamic systems. Topics will include rigid body kinetics and kinematics, work-energy principle, impulse-momentum principle, and damped and undamped vibrations. Prerequisite: MATH 361  and ENGR 221 .
  
  • ENGR 331 - Fluid Mechanics Laboratory


    Lecture Hours: 0
    Lab Hours: 3
    Credit Hours: 1
    Terms Offered: Fall

    Overview of instrumentation and uncertainties for the measurement of fluid properties, velocity, and pressure. Additionally, students will learn basic techniques of simulating fluid flow (Computational Fluid Dynamics). Corequisite: ENGR 333 . Course fee.
  
  • ENGR 332 - Mechanics of Materials


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    A study of the internal effects of stresses and strains on solid bodies subjected to external loading. Prerequisite: ENGR 220  and MATH 186 .
  
  • ENGR 333 - Fluid Mechanics


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    Overview of fluid static and dynamic properties; principles of conservation of energy and momentum, flow of real fluid; flow of ideal fluid; laminar and turbulent flow regimes. Application of fluid mechanic laws to engineering problems and design elements. Prerequisite: ENGR 220 . Corequisite: MATH 361 .
  
  • ENGR 334 - Heat and Mass Transfer


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    A study of the rates of heat and mass transfer using the fundamental mechanisms of conduction, convection, and radiation. Prerequisite: ENGR 281 , MATH 361 , and credit for or conncurrent enrollment in ENGR 333 .
  
  • ENGR 338 - Design of Machine Elements


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring, even years

    Design of machine component, such as gearing, shafts, transmission components, and application of frictionless bearings. Prerequisite: ENGR 332 . Junior standing.
  
  • ENGR 342 - Measurement Techniques


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    An introduction to transducers for measuring physical phenomena such as temperature, pressure, and acceleration. Signal processing and statistical concepts related to measured variables are also included. Prerequisite: ENGR 135 , PHYS 222 , and MATH 361 . Corequisite: ENGR 343 .
  
  • ENGR 343 - Measurement Techniques Laboratory


    Lecture Hours: 0
    Lab Hours: 3
    Credit Hours: 1
    Terms Offered: Fall

    A laboratory introduction to transducers for measuring physical phenomena such as temperature, pressure, and acceleration. Signal processing and statistical concepts related to measured variables are also included. Prerequisite: ENGR 136 , PHYS 222 , and MATH 361 . Corequisite: ENGR 342 . Course fee.
  
  • ENGR 350 - Engineering Economics


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    Application of economic analysis techniques to analyze and compare engineering projects or other type of investments. Topics covered include principles of economic equivalence, time value of money, analysis of investments, comparison of alternatives, equipment depreciation and income taxes, inflation, and uncertainty. Prerequisite: MATH 131  or MATH 185 . May be used to satisfy University Requirements.
  
  • ENGR 351 - Statistical Quality Control


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall, odd years

    Introduction to quality control and improvement. Total quality management and six sigma; principles of lean engineering; control charts; and process capability analysis. Use of Minitab statistical software as a computational tool. Prerequisite: ENGR 115 , ENGR 116 , and ENGR 377 .
  
  • ENGR 352 - Engineering Optimization


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring, even years

    Development and application of fundamental deterministic optimization models and solution methods; focus on quantitative modeling and formulation of linear, integer, and network flow problems; use of computer optimization software to model and solve real-life problems. Prerequisite: ENGR 115 , ENGR 116 , and ENGR 377 .
  
  • ENGR 353 - Management Systems and Production Planning


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall, even years

    Innovated approach to Production and Management Systems using Dr. Eli Goldratt’s Theory of Constraints methods. Global Optimization verses Local Optimization strategy will be investigated. Alternate methods of systems will be covered. Prerequisite: ENGR 377 . Junior standing.
  
  • ENGR 355 - Electronic Devices


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall, Spring, Summer

    Basic physics of semiconductors, pn junctions, diode circuits, bipolar junction transistors, field effect transistors, small-signal and power amplifiers, ideal and non-ideal op amps, oscillators. Prerequisite: MATH 186  and ENGR 135 . Corequisite: ENGR 356 .
  
  • ENGR 356 - Electronic Devices Laboratory


    Lecture Hours: 0
    Lab Hours: 3
    Credit Hours: 1
    Terms Offered: Fall, Spring, Summer

    Project-oriented laboratory focused on design and implementation of analog circuits with semiconductor devices. Corequisite: ENGR 355 . Course fee.
  
  • ENGR 360 - Electricity and Magnetism


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    Electro- and magneto-statics theory, Maxwell’s equations, electromagnetic field theory, dielectrics, displacement current, current density, Poynting vector, scalar potentials, vector potentials and design applications. Prerequisite: PHYS 222 . Corequisite: PHYS 463  or MATH 463 . Same as PHYS 360.
  
  • ENGR 362 - Optics


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    Light, lenses, aberrations, diffraction, interference, polarization, resolving power, coherence, Fourier transforms, spectroscopy. Prerequisite: PHYS 222 /PHYS 223 ; MATH 186 . Corequisite: ENGR 363 . Same as PHYS 362 .
  
  • ENGR 363 - Optics Laboratory


    Lecture Hours: 0
    Lab Hours: 4
    Credit Hours: 1
    Terms Offered: Spring

    Corequisite: ENGR 362 . Course fee. Same as PHYS 363 .
  
  • ENGR 370 - Structural Analysis


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    Introduction to basics of structural engineering: design loads, shear and moment diagrams, equilibrium of external and internal forces, deflection of structures, and influence line diagrams to aid in predicting deflected shapes. Prerequisite: ENGR 332 .
  
  • ENGR 372 - Soil Mechanics


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring, even years

    Principles and applications of geotechnical engineering. Topics include: soil behaviors and mechanical properties, identification and classification, flow, net, consolidation and settlement, stresses in soils and shear strength, slope stability, retaining walls, lateral earth pressures, and bearing capacity. Prerequisite: ENGR 332 .
  
  • ENGR 373 - Engineering Field Methods Laboratory


    Lecture Hours: 0
    Lab Hours: 3
    Credit Hours: 1
    Terms Offered: Spring, odd years

    A laboratory course focusing on evaluation of material properties, quality, and methods used for field analysis in civil engineering. Emphasis will be given to improving student written and oral communication skills. Prerequisite: ENGR 221 . Course fee.
  
  • ENGR 376 - Water Resources Engineering


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    Introduction to water resource engineering, including rainfall-runoff modeling and hydrologic frequency analysis. Design of hydraulic systems such as open channels, pipe networks, and storm water systems will be explored. Prerequisite: ENGR 333 .
  
  • ENGR 377 - Statistics for Engineers


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    Foundation in concepts associated with uncertainty in practical engineering systems, including proper formulation of data analysis methods and correct interpretation of such analyses. Topics include data collection, basic probability and distributions, central limit theorem, confidence intervals, hypothesis testing, and linear regression. Applications focus on analysis and modeling of relationships in data. Prerequisite: MATH 186 .
  
  • ENGR 378 - Introduction to Environmental Engineering


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall, even years

    Introduction to environmental engineering and science fundamentals including chemistry, microbiology, mass balance, and applications. Applications include: water quality, water and wastewater treatment, water reuse, solid and hazardous waste, and air pollution. Prerequisite: ENGR 333  (or simultaneous enrollment), CHEM 131 , and CHEM 133 .
  
  • ENGR 387 - Power Electronics and Electromechanics


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall, even years

    This course covers the following list of topics: power and energy fundamentals in the context of electric circuits, mutual inductance, three-phase power, electromechanical forces and torques, cycles of energy conversion, and electric machines. Prerequisite: ENGR 135  and ENGR 136 .
  
  • ENGR 388 - Network Analysis


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall, odd years

    Active and passive electrical networks, time and frequency domains, Fourier and LaPlace transform techniques, some non-linear circuits. Prerequisite: MATH 361  and either ENGR 135  or PHYS 135 . Same as PHYS 388 .
  
  • ENGR 390 - Junior Clinic


    Lecture Hours: 3
    Lab Hours: 3
    Credit Hours: 3
    Terms Offered: Fall, Spring

    A junior year engineering design experience. Students will engage in team based professional level engineering design projects using design procedures to develop specifications, alternate solutions, and engineering drawing and plans while considering external constraints. Students will construct, model, test, and evaluate designs. Prerequisite: Credit for or simultaneous enrollment in ENGR 342 /ENGR 343  or ENGR 333 . Course fee.
  
  • ENGR 410 - Signal Processing


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring, odd years

    This course introduces linear, time-invariant (LTI) systems, discrete and continuous time signals, the Laplace, z, and Fourier transforms and their applications in the interpretation, encoding, and processing of electronic information. Prerequisite: ENGR 135 , ENGR 136 , and MATH 361 .
  
  • ENGR 422 - Embedded Systems


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    This course introduces fundamental concepts of embedded systems including C and assembly language programming, debugging, power supply considerations, and interfacing sensors, displays, and motors to microcontrollers. Prerequisite: CS 120 . Corequisite: ENGR 423 .
  
  • ENGR 423 - Embedded Systems Laboratory


    Lecture Hours: 0
    Lab Hours: 3
    Credit Hours: 1
    Terms Offered: Spring

    This laboratory introduces fundamental concepts of embedded systems including C and assembly language programming, debugging, power supply considerations, and interfacing sensors, displays, and motors to microcontrollers. Prerequisite: CS 120 . Corequisite: ENGR 422 . Course fee.
  
  • ENGR 430 - Senior Clinic I


    Lecture Hours: 3
    Lab Hours: 3
    Credit Hours: 3
    Terms Offered: Fall

    The first of a two-course senior-level engineering design experience. Students will engage in team-based professional level engineering design projects using design procedures to develop specifications, alternate solutions, and engineering drawing and plans while considering external constraints. In collaboration with clients, students will develop an engineering design to be prototyped in ENGR 432 . Prerequisite: ENGR 390 . Course fee. Contributes to completion of university capstone requirements.
  
  • ENGR 431 - Senior Clinic Studio I


    Lecture Hours: 0
    Lab Hours: 3
    Credit Hours: 1
    Terms Offered: Fall

    The studio component of the first of a two-course senior-level engineering design experience. Students will engage in team based professional level engineering design projects using design procedures to develop specifications, alternate solutions, and engineering drawing and plans while considering external constraints. When appropriate, students will construct, model, test, and evaluate designs. Prerequisite: ENGR 390 . Corequisite: ENGR 430 .
  
  • ENGR 432 - Senior Clinic II


    Lecture Hours: 3
    Lab Hours: 3
    Credit Hours: 3
    Terms Offered: Spring

    The second part of a two-course senior-level engineering design experience. Students will engage in team based professional level engineering design projects using design procedures to develop specifications, alternate solutions, and engineering drawing and plans while considering external constraints. Using engineering design procedures students complete a prototype of the design created during the first part of the design sequence (ENGR 430 ). Prerequisite: ENGR 430  with a grade of C or higher. Course fee. A writing-intensive course. Contributes to completion of university capstone requirements.
  
  • ENGR 433 - Senior Clinic Studio II


    Lecture Hours: 0
    Lab Hours: 3
    Credit Hours: 1
    Terms Offered: Spring

    The studio component of the second of a two-course senior-level engineering design experience. Students will engage in team based professional level engineering design projects using design procedures to develop specifications, alternate solutions, and engineering drawing and plans while considering external constraints. Students will construct, model, test, and evaluate design. Corequisite: ENGR 432 .
  
  • ENGR 434 - Fluid Thermal Systems


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    Design and optimization of thermal systems with real world constraints, as well as economic and design analysis. A formal technical written report and oral presentation are required. Prerequisite: ENGR 333  and either ENGR 281  or ENGR 481 .
  
  • ENGR 435 - Finite Element Analysis


    Lecture Hours: 2
    Lab Hours: 2
    Credit Hours: 3
    Terms Offered: Fall, even years

    Introduction to basic theory and usage of the Finite Element Method (FEM) applied to solid mechanics. Formulation of 1-D and 2-D FEM and use of computer software for 2-D and 3-D analysis. Design and optimization of solid objects. Prerequisite: MATH 286 , MATH 361 , and ENGR 221 . Course fee.
  
  • ENGR 436 - Systems and Controls


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring, odd years

    A study of the techniques used for design and analysis of control systems involving system modeling, Laplace transforms, and feedback control methods. Prerequisite: ENGR 221  and MATH 361 .
  
  • ENGR 450 - Systems Simulation


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring, odd years

    Fundamentals of simulation methods. Systematic development, programming, and analysis of computer simulation models using Arena software. Applications of simulation to industrial settings. Prerequisite: ENGR 115 , ENGR 116 , and ENGR 377 .
  
  • ENGR 470 - Design of Structures


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring, odd years

    Fundamental principles of structural design with focus on the selection of materials and design of structural systems. Prerequisite: ENGR 370 .
  
  • ENGR 481 - Thermodynamics


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall, and as needed

    Fundamental concepts of thermodynamic systems. Law of thermodynamics, properties of simple compressible substances, entropy, energy availability, ideal gas mixtures and psychometrics, and thermodynamic cycles. Application to engines, refrigeration systems and energy conversion. Prerequisite: PHYS 330  and MATH 286 . Same as PHYS 481 .

Environmental Science

  
  • ENVR 112 - Plant Science


    Lecture Hours: 2
    Lab Hours: 3
    Credit Hours: 3
    Terms Offered: Spring

    A study of the applied botanical sciences. Special emphasis is placed on the use of plants by man. Plant ecology, physiology, morphology, and reproduction will be discussed in agricultural, economic, and sociological contexts. The influence of environmental factors and emerging technologies on plant growth and development will be discussed. Laboratory graded and credited with course. May be used to satisfy University Requirements. Course fee.
  
  • ENVR 233 - Soil Science


    Lecture Hours: 2
    Lab Hours: 3
    Credit Hours: 3
    Terms Offered: Spring

    A basic course dealing with soil types and parent material, chemical, physical, and biological properties of soils. Laboratory graded and credited with course. May be used to satisfy University Requirements. Course fee.
  
  • ENVR 320 - Energy Resources


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    A study of energy conservation, energy efficiency, the numerous forms of energy, how energy is converted from one form to another and how it is used throughout the world. Presents an environmental world-view through lectures, readings, research and reflection. Focused on safe application of energy to solve problems and meet the needs of today in a way that is sustainable into the future. Prerequisite: Junior standing.
  
  • ENVR 341 - Water Resources


    Lecture Hours: 2
    Lab Hours: 3
    Credit Hours: 3
    Terms Offered: Spring

    A study of the use, conservation, and management of water resources within West Texas and the southwest. Discusses demand for fresh water and the limited water supplies in arid environments. Laboratory graded and credited with course. Prerequisite: Junior standing. Course fee.
  
  • ENVR 345 - Range and Wildland Plants


    Lecture Hours: 2
    Lab Hours: 3
    Credit Hours: 3
    Terms Offered: Fall

    Identification, classification, multiple use and economic value of native and introduced range and wildland plants in the Southwest. Laboratory graded and credited with course. Prerequisite: Junior standing. Same as BIOL 345 . Special travel fee and lab fee.
  
  • ENVR 350 - Rangeland Ecology


    Lecture Hours: 2
    Lab Hours: 3
    Credit Hours: 3
    Terms Offered: Fall

    Physical features affecting the use of range vegetation; field classification of range grasses and range plants. Mapping, surveying and conducting range ecological studies. Designed for students desiring to work in the field of range management. Actual problems will be assigned in the field. Laboratory graded and credited with course. Course fee.
  
  • ENVR 354 - Range Science


    Lecture Hours: 2
    Lab Hours: 2
    Credit Hours: 3
    Terms Offered: Spring, even years

    The study of planned range use in order to obtain maximum animal and plant production without degrading the quality of the ecosystem. Range utilization studies, methods of reseeding rangeland and the study of improvement techniques. Laboratory graded and credited with course. Prerequisite: ENVR 345 , ENVR 350 . Course fee.
  
  • ENVR 410 - Environmental Law and Policy


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    Introduces the basic concepts and issues underlying environmental regulation. Includes environmental policy frameworks, protection and regulatory instruments, and major federal environmental statutes. Prerequisite: POLS 225  or higher. A capstone course.
  
  • ENVR 420 - Environmental Thought


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    A history and philosophy reading survey exploring the relationship between nature and man. Presents an environmental world-view through lectures, readings, research and reflection. Focus is on philosophy and environmental ethics such as anthropocentrism, biocentrism and ecocentrism, preservation, conservation, Christian stewardship, eco-feminism, deep ecology, and sustainability from an eastern, western and Native American perspective. Prerequisite: Senior standing. A capstone and writing-intensive course.
  
  • ENVR 455 - Wildlife Ecology


    Lecture Hours: 3
    Lab Hours: 3
    Credit Hours: 4
    Terms Offered: Fall

    Principles of animal ecology; life histories, economic and management phases of important species of big game, upland game, waterfowl, and fish. Laboratory graded and credited with course. Recommended for animal science, environmental science and biology majors. Prerequisite: Junior standing. Course fee.
  
  • ENVR 458 - Wildlife Management Techniques


    Lecture Hours: 2
    Lab Hours: 3
    Credit Hours: 3
    Terms Offered: Spring

    The purpose of this course is to describe major approaches to problem solving, suggest ways of implementing these approaches, and to improve the management of the wildlife resource through more rapid development and improved use of techniques. Laboratory graded and credited with course. Designed for environmental science majors pursuing the Wildlife and Natural Resource Management track, and biology majors. Prerequisite: ENVR 455  or BIOL 380 . Course fee.

Family Studies

  
  • FAM 232 - Family Finances


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    Principles of finance and utilization of time and energy resources for the family. Includes spending plans, credit, savings, insurance, housing, taxes, investments, and estate planning.
  
  • FAM 251 - Introduction to Family Studies


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    The study of relationships, marriages and families as a social science. Examines interpersonal relationships and the dynamics of marriage and family life with an emphasis on the formation of healthy relationships and the maintenance of marital and family strengths. May be used to satisfy University Requirements.
  
  • FAM 262 - Intimate Relationships and Marriage


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    Introduction to the scientific study of intimate relationships, including theory, research methods, healthy and unhealthy relationship dynamics, and processes such as relationship formation, maintenance, and dissolution. Explores diversity in the context of intimate relationships. Discussions of biblical principles related to intimate relationships will take place throughout the course.
  
  • FAM 265 - Child Development


    Lecture Hours: 3
    Lab Hours: 1
    Credit Hours: 3
    Terms Offered: Fall

    Examines the physical, cognitive and psychosocial development of children from conception through adolescence including the appropriate care and guidance of children during infancy and toddlerhood, early childhood, middle childhood and adolescence. Theories of child development and the dynamic interaction of children with their social environments are examined.
  
  • FAM 275 - Child Development Ages 0-11


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    An introduction to the development, care, and guidance of the infant and young child (ages 0-11). A minimum of 6 hours of observation/interaction with children is required.
  
  • FAM 280 - Child Development Ages 12-18


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    An introduction to the development, care, and guidance of the adolescent child (ages 12-18). A minimum of 6 hours of observation/interaction with adolescents is required. Prerequisite: FAM 275  
  
  • FAM 325 - Child Life


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    An introduction to the theory and practice of the Child Life profession. Students will gain a working knowledge of the following: scope of practice, impact of the healthcare experience in patients and families, therapeutic play, procedural preparation, family-centered care, and the Child Life Documents.
  
  • FAM 335 - Therapeutic Play


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    An exploration of the historical and contemporary realities of play, along with a focus on the importance of play in healthy growth and development, and the structuring of therapeutic play.
  
  • FAM 356 - Human Intimacy


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    Current social science research and literature pertaining to the dynamics of human intimacy and sexuality are examined from a biopsychosocial perspective. This course provides a conceptual framework and understanding of human sexuality necessary to address a multitude of sexual issues encountered when working with a highly diverse and secular audience. Prerequisite: Junior standing.
  
  • FAM 362 - Families in Society


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    Examines historical and current trends in marriage and family life relevant to contemporary American society. The course provides an eco-systemic view of marriage and family life and demonstrates how social policies and family laws as well as social service programs impact the ability of families to fulfill their social functions.
  
  • FAM 365 - Research Methods in Child and Family Services


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    Understanding and evaluating research in the social sciences with emphasis on human development, family studies, and Child Life. An introduction to statistical concepts, research design, measurement, sampling, quantitative and qualitative methods of data collection and analysis, data management, and presentation of research findings. Prerequisite: Junior standing.
  
  • FAM 385 - Family Theories: An Introduction


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    The purpose of this course is to introduce students to a variety of theoretical frameworks for understanding the internal dynamics of family systems. Students will explore how major concepts from various theories can be utilized to explain and predict human behavior in the context of interpersonal relationships and family life.
  
  • FAM 443 - Death and Bereavement


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Summer

    This course explores the experiences of death, dying and bereavement through a family systems perspective. Students will study the historical and cultural context of death, the experience of death along the life cycle stages, and the impact of death for families and involved individuals related to the death experience. A personal exploration of one’s reactions to death, dying and bereavement will be integrated in the course, as well as an examination of death and dying from the points of view of dying persons, their families and friends, and family and service professionals.
  
  • FAM 452 - Parenting and Family Skills


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    Principles of effective parenting including theoretical approaches to understanding parent/child relations, the etiology of child behaviors, dysfunctional parenting styles and mechanisms of behavior change. Emphasis is given to strengthening positive behaviors and developing significant perceptions and skills in children. Different family structures and interactions over the family life-span are considered.
  
  • FAM 453 - Family Crises and Resiliency


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    Consideration of social institutions and resources in the community as they affect the well-being of children and families. Attention is given to: (1) families experiencing stress and crises; (2) working with nontraditional family structures (e.g., single parent and stepfamilies) (3) community resources for meeting family needs; and (4) providing students with practical experiences and information needed to work effectively with community groups.
  
  • FAM 454 - Aging and the Family


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    Examines successful aging from a bio-psychosocial framework with an emphasis on changes in interpersonal relationships, roles, and family dynamics associated with aging family members. Topics include: common problems and decisions facing aging families, marriage in later life, being single, parent-child relationships, sibling ties, the role of grandparents, divorce and remarriage, physiological/health issues leading to increased dependency and long-term care and one’s life review.
  
  • FAM 455 - Ministry to Fathers


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    Reviews current literature on fathering with an emphasis on equipping men and women (husbands and wives) for the vital role that fathers play in the lives of their children/family. Examines the impact of father’s absence on the lives of sons and daughters, including barriers that hinder father involvement. Participants examine the principles of effective fathering as well as how wives contribute to their husband’s fathering style. Biblical principles of masculinity are examined as well as how men become spiritual leaders of their families.
  
  • FAM 470 - Family Life Education Methodology


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall

    Provides students with an understanding of the competencies, broad knowledge base, and skills required for the ethical practice of family life education. Students acquire knowledge regarding the design, implementation and evaluation of family life education programs including methods of teaching/learning relevant to diverse audiences within a variety of community settings. Prerequisite: FAM 251 , FAM 356 , FAM 452 , or approval of instructor.
  
  • FAM 485 - Ethics and Professional Development


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    This course is designed to foster the personal and professional development of Family Studies majors via the integration of faith and learning, the process of ethical decision making, and the requisite professional skills required by careers in family life education and social services. Prerequisite: FAM 470  and FAM 495  (either course may be taken as a corequisite if not completed as a prerequisite). A capstone and writing- intensive course.
  
  • FAM 495 - Practicum in Child and Family Services


    Lecture Hours: 1
    Lab Hours: 8
    Credit Hours: 3
    Terms Offered: Spring, Summer

    Supervised experience in a community-based family life education or service program. Students in the course will complete a minimum of 120 clock hours service-learning in the community program. This course is available for variable credit. Please see your advisor for more information. Prerequisite: Junior standing; instructor and department chair approval; and acceptance of the student by a community program. For majors only.

Finance

  
  • FIN 310 - Financial Management


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall, Spring, Summer

    Financial analysis, capital budgeting, working capital management, sources and forms of long-term financial structure, the cost of capital, and dividend policy. Prerequisite: ACCT 210 ; ECON 260 , ECON 261 , with a grade of “C” or better; MATH 130 .
  
  • FIN 311 - Money and Banking


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    Nature and operations of our money and banking system, and the application of modern monetary and banking theory to domestic and international problems. Prerequisite: ACCT 210 ; ECON 260 , ECON 261  with a grade of “C” or better; MATH 130 .
  
  • FIN 411 - Principles of Investment


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall, Spring

    Introduction to securities markets, presentation of risk-return analysis, analysis of common stocks and bonds, and introduction to portfolio analysis. Prerequisite: FIN 310 , with a grade of “C” or better.
  
  • FIN 412 - Financial Theory and Practice


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall, Spring

    The acquisition and use of financial resources are examined from the perspective of the financial manager. Coverage includes both theoretical and practical aspects of financial management. Prerequisite: FIN 310  with a grade of “C” or better.
  
  • FIN 414 - Bank Management


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: on demand

    The organization of the bank, sources of bank funds, allocation of bank funds, and supervision and regulation of the commercial bank. Prerequisite: FIN 310 , with a grade of “C” or better.
  
  • FIN 416 - Personal Financial Planning


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall, Spring

    Introduction to the methodology and discipline of personal financial planning. Focuses on the comprehensive and ongoing planning process that seeks to quantify personal financial objectives and balance the components of risk management, personal investments, tax considerations, retirement preparation, and estate planning. Prerequisite: 72 earned hours.
  
  • FIN 419 - International Financial Markets


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    A study of the concept of the balance of payments, different methods of financing international trade including the methods, documents, and institutions used, and an examination of capital investments and international financial markets. Prerequisite: FIN 310 , with a grade of “C” or better. May be used to satisfy University requirements.
  
  • FIN 420 - Entrepreneurial Finance


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Spring

    This course is focused on the financial aspects of a new venture from idea to operation to harvest. The course will help students develop understanding and proficiency with respect to the concepts and tools of entrepreneurial finance and help foster an entrepreneurial spirit. Prerequisite: FIN 310  with a grade of “C” or better.
  
  • FIN 434 - Portfolio Management


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall, Spring

    Each student will use valuation techniques to select common stocks to comprise a portfolio. The performance of each portfolio will be compared to that of other students and a benchmark. Each student will make five presentations to the class regarding their portfolio’s composition and performance. Collectively, the students will function as an Investment Committee in managing a class portfolio. Prerequisite: FIN 310  with a grade of “C” or better.
  
  • FIN 439 - Student Managed Investment Fund


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: Fall, Spring

    This course comprises a group of students that are responsible for managing a portion of the university’s endowment. Specifically, they are responsible for constructing and monitoring a portfolio of long positions in common stocks. This portfolio is referred to as the Student Managed Investment Fund and uses the brand name STAR (Student Trading and Research). Prerequisite: FIN 310  with a grade of “C” or better.
  
  • FIN 499 - Finance Internship


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    Terms Offered: on demand

    A practical work experience in accounting or finance. This course is available for variable credit. Please see your advisor for more information. Prerequisite: ACCT 310 ; FIN 310 ; GPA of 2.75 or above in business courses; overall GPA of 2.50 or above; and consent of department chair. Same as ACCT 499 , IS 499 , ITC 499 , MGMT 499  and MKTG 499 .
  
  • FIN 643 - International Finance


    Lecture Hours: 3
    Lab Hours: 0
    Credit Hours: 3
    This course focuses on the structure and opportunities for the multinational firm, through understanding of the international monetary system and balance of payments. Specific aspects of international cash flow management are examined together with the management of financial risk related to foreign investments and capital funding in an international context
 

Page: 1 <- 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14Forward 10 -> 20